Basic Info.
Application
Heavy Duty Truck
Rolling Body
Roller Bearings
Outer Dimension
Small and Medium-Sized (60-115mm)
Spherical
Non-Aligning Bearings
Load Direction
Axial Bearing
Transport Package
in Craft Paper Carton
Origin
Ningbo, Zhejiang, China
Product Description
Separable, they consist of inner ring and a cage with rollers
Designed to carry large, and compound loads (axial and radial) in one direction only
313 series (with enlarged contact angle) are applied in order to carry largest axial loads
Cages are mainly made of steel (polyamide cages are very rare)
Bearings produced at present have modernised construction comparing to basic versions and characterise of higher load capacity and better rotary parameters. This was obtained by increasing number and size of rollers by keeping unchanged main dimensions of bearings. These constructions are marked with "A" after main symbol of bearing.
The outer race and the inner race of the Tapered Roller Bearing are provided with conical raceway, and conical rollers are mounted on among raceways. If the conical surface is extended, it will converge on one point of the bearing axis. Tapered Roller Bearing is mainly used to be subject to radial and axial combination load in which the radial load is major load. Axial load capacity of the bearing is determined by contact angle. The larger the contact angle, the greater the axial load capacity. The Tapered Roller Bearing is separate bearing. The inner race provided with rollers and holder composes the inner component, which can be separately mounted with the outer race.
This type of bearing can limit one side axial displacement of shaft or housing, and does not allow shaft to incline relative to housing bore. Under the effect of radial load, additional axial force will be generated. So the outer race and the inner race are generally mounted opposite to ends in the two supports of the bearing.
This type of bearing is mainly applied on front wheel and rear wheel of cars, transmission, differential mechanism, shaft pinion, machine tool main shaft, construction machinery, large-sized agricultural machinery, mechanical reduction gear of railway car and rolling mill journal speed reducer.
Right Part | Right Price |
CIE offers ball bearings, tapered roller bearings, needle roller bearings, cylindrical bearings, Spherical Roller Bearings, Thrust bearings, special bearings, Auto bearings, ball screw, linear guide rail and block assembly, Steering gear and parts | The typical difference between industry bearing and power transmission parts and steering gears and parts from an Original Equipment Manufacturer is the price. CIE sell good at reasonable and fair price to any customer and any country for future and long business relationships in this line |
Right Quality | Right Delivery |
High quality is the name of the game when it comes to bearings,and other auto parts. At CIE we put all of our parts through a rigorous inspection to ensure they meet our high standards. We then back each of part with a two year unlimited mileage warrant. | As if the savings you'll enjoy on CIE timely delivery for each order, we offer free samples to all of the continental world country. If there is any delay by us. We can use best way to make up for the goods quickly like via by air or by express at our expenses |
Single-row Tapered Roller Bearing
This type of bearings can only limit axial displacement of shaft or housing in one direction, and be subject to axial load in one direction. Under the effect of radial load, axial force generated in bearing should be balanced, and two bearings should be used in face to face type or back to back type.
Single-Row Tapered Roller Bearings (metric) |
Bearing No. | Boundary dimensions (mm) | Basic load ratings (KN) | Limiting speeds (rpm) | d | D | T | B | C | r min | r1 min | Cr(KN) | Cor(KN) | Grease lub. | Oil lub | 30302 | 15 | 42 | 14.25 | 13 | 11.0 | 1.0 | 1.0 | 21.9 | 19.2 | 10000 | 14000 | 30202 | 15 | 35 | 11.75 | 11 | 10.0 | 0.6 | 0.6 | 14.9 | 13.4 | 12000 | 16000 | 30203 | 17 | 40 | 13.25 | 16 | 11.0 | 1.0 | 1.0 | 20.8 | 20.7 | 10000 | 14000 | 30303 | 17 | 47 | 17.25 | 14 | 12.0 | 1.0 | 1.0 | 27.4 | 24.5 | 9200 | 12000 | 32303 | 17 | 47 | 15.25 | 19 | 16.0 | 1.0 | 1.0 | 31.9 | 29.9 | 9400 | 13000 | 32004 | 20 | 42 | 15.00 | 15 | 12.0 | 0.6 | 0.6 | 27.3 | 31.5 | 9700 | 13000 | 30204 | 20 | 47 | 15.25 | 14 | 12.0 | 1.0 | 1.0 | 27.0 | 27.2 | 8700 | 12000 | 32204 | 20 | 47 | 19.25 | 18 | 15.0 | 1.0 | 1.0 | 33.1 | 34.7 | 8900 | 12000 | 30304 | 20 | 52 | 16.25 | 15 | 13.0 | 1.5 | 1.5 | 35.0 | 33.5 | 7500 | 10000 | 32304 | 20 | 52 | 22.25 | 21 | 18.0 | 1.5 | 1.5 | 45.1 | 46.7 | 8400 | 11000 | 320/22 | 22 | 44 | 15.00 | 15 | 11.5 | 0.6 | 0.6 | 28.3 | 33.6 | 9100 | 12000 | 30305 | 25 | 62 | 18.25 | 17 | 15.0 | 1.5 | 1.5 | 48.2 | 46.9 | 6800 | 9000 | 30305D | 25 | 62 | 18.25 | 17 | 13.0 | 1.5 | 1.5 | 41.5 | 45.0 | 5700 | 8000 | TR0506R | 25 | 62 | 18.25 | 17 | 14.0 | 1.5 | 1.5 | 45.0 | 45.8 | 6700 | 9000 | 33205 | 25 | 52 | 22.00 | 22 | 18.0 | 1.0 | 1.0 | 48.9 | 58.5 | 7900 | 1000 | 30205 | 25 | 52 | 16.25 | 15 | 13.0 | 1.0 | 1.0 | 31.5 | 33.7 | 7800 | 10000 | 32005 | 25 | 47 | 15.00 | 15 | 11.5 | 0.6 | 0.6 | 30.2 | 37.7 | 8300 | 11000 | 33005 | 25 | 47 | 17.00 | 17 | 14.0 | 0.6 | 0.6 | 27.5 | 37.0 | 8000 | 10700 | 32005A | 25 | 47 | 15.00 | 15 | 11.5 | 3.4 | 1.0 | 23.2 | 18.3 | 8000 | 11000 | 32205 | 25 | 52 | 19.25 | 18 | 16.0 | 1.0 | 1.0 | 39.8 | 44.8 | 7900 | 11000 | 32305 | 25 | 62 | 25.25 | 24 | 20.0 | 1.5 | 1.5 | 61.2 | 64.1 | 6900 | 9100 | 320/28 | 28 | 52 | 16.00 | 16 | 12.0 | 1.0 | 1.0 | 35.2 | 44.0 | 7500 | 10000 | 332/28 | 28 | 58 | 24.00 | 24 | 19.0 | 1.0 | 1.0 | 57.6 | 69.5 | 7000 | 9300 | 30206 | 30 | 62 | 17.25 | 16 | 14.0 | 1.0 | 1.0 | 41.5 | 44.8 | 6500 | 8700 | 32306 | 30 | 72 | 28.75 | 27 | 23.0 | 1.5 | 1.5 | 82.2 | 91.6 | 5900 | 7900 | TRA0607 | 30 | 72 | 20.75 | 19 | 14.0 | 1.5 | 1.5 | 56.5 | 55.2 | 5900 | 7900 | 30306 | 30 | 72 | 20.75 | 19 | 16.0 | 1.5 | 1.5 | 59.6 | 50.1 | 5800 | 7700 | 32206 | 30 | 62 | 21.25 | 20 | 17.0 | 1.0 | 1.0 | 50.7 | 57.9 | 6500 | 8700 | 33006 | 30 | 55 | 20.00 | 20 | 16.0 | 1.0 | 1.0 | 39.5 | 59.5 | 6700 | 9100 | 32006 | 30 | 55 | 17.00 | 17 | 13.0 | 1.0 | 1.0 | 38.2 | 48.0 | 7000 | 9400 | 33206 | 30 | 62 | 25.00 | 25 | 19.5 | 1.0 | 1.0 | 66.4 | 79.4 | 6500 | 8700 | 320/32 | 32 | 58 | 17.00 | 17 | 13.0 | 1.0 | 1.0 | 39.2 | 50.6 | 6700 | 8900 | 332/32 | 32 | 65 | 26.00 | 26 | 20.5 | 1.0 | 1.0 | 71.8 | 86.9 | 6200 | 8300 | 30307 | 35 | 80 | 22.75 | 21 | 18.0 | 2.0 | 1.5 | 76.0 | 79.0 | 7750 | 8050 | 32307 | 35 | 80 | 32.75 | 31 | 25.0 | 2.0 | 1.5 | 101.0 | 114.0 | 5300 | 7000 |
|
Single-Row Tapered Roller Bearings (metric) |
Bearing No. | Boundary dimensions (mm) | Basic load ratings (KN) | Limiting speeds (rpm) | d | D | T | B | C | r min | r1 min | Cr(KN) | Cor(KN) | Grease lub. | Oil lub | 32007 | 35 | 62 | 18.00 | 18 | 14.0 | 1.0 | 1.0 | 45.5 | 59.4 | 6200 | 8200 | 32207 | 35 | 72 | 24.25 | 23 | 19.0 | 1.5 | 1.5 | 69.6 | 82.4 | 5600 | 7500 | 33007 | 35 | 62 | 21.00 | 21 | 17.0 | 1.0 | 1.0 | 51.3 | 68.0 | 6200 | 8200 | 30207 | 35 | 72 | 18.25 | 17 | 15.0 | 1.5 | 1.5 | 55.1 | 60.9 | 5600 | 7400 | 33207 | 35 | 72 | 28.00 | 28 | 22.0 | 1.5 | 1.5 | 87.6 | 107.0 | 5700 | 7500 | 32008 | 40 | 68 | 19.00 | 19 | 14.5 | 1.0 | 1.0 | 53.5 | 71.4 | 5600 | 7400 | 33008 | 40 | 68 | 22.00 | 22 | 18.0 | 1.0 | 1.0 | 60.4 | 84.6 | 5500 | 7400 | 33108 | 40 | 75 | 26.00 | 26 | 20.5 | 1.5 | 1.5 | 82.2 | 108.0 | 5200 | 6900 | 30208 | 40 | 80 | 19.75 | 18 | 16.0 | 1.5 | 1.5 | 62.9 | 69.2 | 5000 | 6700 | 32208 | 40 | 80 | 24.75 | 23 | 19.0 | 1.5 | 1.5 | 77.7 | 90.8 | 5000 | 6600 | 33208 | 40 | 80 | 32.00 | 32 | 25.0 | 1.5 | 1.5 | 108.0 | 139.0 | 5000 | 6700 | 30308 | 40 | 90 | 25.25 | 23 | 20.0 | 2.0 | 1.5 | 90.6 | 101.0 | 4500 | 6100 | 32308 | 40 | 90 | 35.25 | 33 | 27.0 | 2.0 | 1.5 | 116.0 | 139.0 | 4600 | 6200 | 30209 | 45 | 85 | 20.75 | 19 | 16.0 | 1.5 | 1.5 | 67.2 | 77.4 | 4600 | 6100 | 32309 | 45 | 100 | 38.25 | 36 | 30.0 | 2.0 | 1.5 | 146.0 | 180.0 | 4100 | 5500 | 30309 | 45 | 100 | 27.25 | 25 | 22.0 | 2.0 | 1.5 | 113.0 | 128.0 | 4100 | 5400 | 32209 | 45 | 85 | 24.75 | 23 | 19.0 | 1.5 | 1.5 | 84.2 | 104.0 | 4600 | 6100 | 33109 | 45 | 80 | 26.00 | 26 | 20.5 | 1.5 | 1.5 | 87.5 | 120.0 | 4800 | 6400 | 33009 | 45 | 75 | 24.00 | 24 | 19.0 | 1.0 | 1.0 | 69.6 | 101.0 | 500 | 6700 | 32009 | 45 | 75 | 20.00 | 20 | 15.5 | 1.0 | 1.0 | 62.8 | 86.5 | 5000 | 6600 | 33209 | 45 | 85 | 32.00 | 32 | 25.0 | 1.5 | 1.5 | 112.0 | 149.0 | 4600 | 6200 | 32010 | 50 | 80 | 20.00 | 20 | 15.5 | 1.0 | 1.0 | 65.7 | 94.5 | 4600 | 6100 | 33010 | 50 | 80 | 24.00 | 24 | 19.0 | 1.0 | 1.0 | 73.0 | 110.0 | 4600 | 6100 | 33110 | 50 | 85 | 26.00 | 26 | 20.0 | 1.5 | 1.5 | 89.4 | 127.0 | 4400 | 5900 | 30210 | 50 | 90 | 21.75 | 20 | 17.0 | 1.5 | 1.5 | 76.5 | 91.7 | 4300 | 5700 | 32210 | 50 | 90 | 24.75 | 23 | 19.0 | 1.5 | 1.5 | 85.0 | 105.0 | 4300 | 5700 | 33210 | 50 | 90 | 32.00 | 32 | 24.5 | 1.5 | 1.5 | 119.0 | 167.0 | 4300 | 5700 | 30310 | 50 | 110 | 29.25 | 27 | 23.0 | 2.5 | 2.0 | 137.0 | 152.0 | 3700 | 4900 | 32310 | 50 | 110 | 42.25 | 40 | 33.0 | 2.5 | 2.0 | 176.0 | 220.0 | 3700 | 5000 | 30310 | 50 | 110 | 29.25 | 27 | 23.0 | 2.5 | 2.0 | 137.0 | 152.0 | 3700 | 4900 | 33111 | 55 | 95 | 30.00 | 30 | 23.0 | 1.5 | 1.5 | 116.0 | 161.0 | 4000 | 5300 | 30211 | 55 | 100 | 22.75 | 21 | 18.0 | 2.0 | 1.5 | 94.6 | 113.0 | 3900 | 5200 | 32211 | 55 | 100 | 26.75 | 25 | 21.0 | 2.0 | 1.5 | 107.0 | 133.0 | 3900 | 5200 | 33211 | 55 | 100 | 35.00 | 35 | 27.0 | 2.0 | 1.5 | 142.0 | 189.0 | 3900 | 5200 | 30311 | 55 | 120 | 31.50 | 29 | 25.0 | 2.5 | 2.0 | 149.0 | 170.0 | 3300 | 4500 |
|
Single-Row Tapered Roller Bearings (metric) |
Bearing No. | Boundary dimensions (mm) | Basic load ratings (KN) | Limiting speeds (rpm) | d | D | T | B | C | r min | r1 min | Cr(KN) | Cor(KN) | Grease lub. | Oil lub | 32311 | 55 | 120 | 45.50 | 43 | 35.0 | 2.5 | 2.0 | 200.0 | 250.0 | 3400 | 4500 | 33011 | 55 | 90 | 27.00 | 27 | 21.0 | 1.5 | 1.5 | 96.5 | 145.0 | 4100 | 5400 | 32011 | 55 | 90 | 23.00 | 23 | 17.5 | 1.5 | 1.5 | 84.6 | 121.0 | 4100 | 5500 | 33112 | 60 | 100 | 30.00 | 30 | 23.0 | 1.5 | 1.5 | 118.0 | 170.0 | 3700 | 5000 | 32312 | 60 | 130 | 48.50 | 46 | 37.0 | 3.0 | 2.5 | 244.0 | 315.0 | 3100 | 4200 | 30312 | 60 | 130 | 33.50 | 31 | 26.0 | 3.0 | 2.5 | 173.0 | 201.0 | 3100 | 4100 | 33212 | 60 | 110 | 38.00 | 38 | 29.0 | 2.0 | 1.5 | 174.0 | 239.0 | 3600 | 4700 | 30212 | 60 | 110 | 23.75 | 22 | 19.0 | 2.0 | 1.5 | 106.0 | 127.0 | 3500 | 4700 | 33012 | 60 | 95 | 27.00 | 27 | 21.0 | 1.5 | 1.5 | 101.0 | 162.0 | 3900 | 5200 | 32012 | 60 | 95 | 23.00 | 23 | 17.5 | 1.5 | 1.5 | 86.1 | 127.0 | 3900 | 5200 | 32212 | 60 | 110 | 29.75 | 28 | 24.0 | 2.0 | 1.5 | 132.0 | 167.0 | 3500 | 4700 | 33113 | 65 | 110 | 34.00 | 34 | 26.5 | 1.5 | 1.5 | 152.0 | 223.0 | 3400 | 4600 | 30313 | 65 | 140 | 36.00 | 33 | 28.0 | 3.0 | 2.5 | 204.0 | 239.0 | 2800 | 3800 | 33213 | 65 | 120 | 41.00 | 41 | 32.0 | 2.0 | 1.5 | 200.0 | 277.0 | 3200 | 4300 | 32013 | 65 | 100 | 23.00 | 23 | 17.5 | 1.5 | 1.5 | 90.0 | 137.0 | 3600 | 4800 | 33013 | 65 | 100 | 27.00 | 27 | 21.0 | 1.5 | 1.5 | 103.0 | 169.0 | 3600 | 4800 | 32213 | 65 | 120 | 32.75 | 31 | 27.0 | 2.0 | 1.5 | 157.0 | 203.0 | 3200 | 4300 | 30213 | 65 | 120 | 24.75 | 23 | 20.0 | 2.0 | 1.5 | 128.0 | 156.0 | 3200 | 4300 | 32214 | 70 | 125 | 33.25 | 31 | 27.0 | 2.0 | 1.5 | 169.0 | 225.0 | 3100 | 4100 | 32314 | 70 | 150 | 54.00 | 51 | 42.0 | 3.0 | 2.5 | 317.0 | 414.0 | 2700 | 3600 | 33214 | 70 | 125 | 41.00 | 41 | 32.0 | 2.0 | 1.5 | 206.0 | 294.0 | 3100 | 4100 | 30214 | 70 | 125 | 26.25 | 24 | 21.0 | 2.0 | 1.5 | 138.0 | 173.0 | 3100 | 4100 | 33114 | 70 | 120 | 37.00 | 37 | 29.0 | 2.0 | 1.5 | 181.0 | 266.0 | 3100 | 4200 | 33014 | 70 | 110 | 31.00 | 31 | 25.5 | 1.5 | 1.5 | 134.0 | 208.0 | 3300 | 4400 | 32014 | 70 | 110 | 25.00 | 25 | 19.0 | 1.5 | 1.5 | 108.0 | 163.0 | 3300 | 4400 | 30314 | 70 | 150 | 38.00 | 35 | 30.0 | 3.0 | 2.5 | 230.0 | 273.0 | 2600 | 3500 | 32315 | 75 | 160 | 58.00 | 55 | 45.0 | 3.0 | 2.5 | 363.0 | 481.0 | 2500 | 3300 | 30315 | 75 | 160 | 40.00 | 37 | 31.0 | 3.0 | 2.5 | 260.0 | 311.0 | 2500 | 3300 | 33115 | 75 | 125 | 37.00 | 37 | 29.0 | 2.0 | 1.5 | 186.0 | 280.0 | 3000 | 4000 | 33215 | 75 | 130 | 41.00 | 41 | 31.0 | 2.0 | 1.5 | 212.0 | 310.0 | 2900 | 3900 | 33015 | 75 | 115 | 31.00 | 31 | 25.5 | 1.5 | 1.5 | 141.0 | 225.0 | 3200 | 4200 | 32015 | 75 | 115 | 25.00 | 25 | 19.0 | 1.5 | 1.5 | 110.0 | 169.0 | 3100 | 4200 | 32215 | 75 | 130 | 33.25 | 31 | 27.0 | 2.0 | 1.5 | 174.0 | 234.0 | 2900 | 3900 | 30215 | 75 | 130 | 27.25 | 25 | 22.0 | 2.0 | 1.5 | 142.0 | 181.0 | 2900 | 3900 | 32016 | 80 | 125 | 29.00 | 29 | 22.0 | 1.5 | 1.5 | 147.0 | 225.0 | 2900 | 3900 |
|
Single-Row Tapered Roller Bearings (metric) |
Bearing No. | Boundary dimensions (mm) | Basic load ratings (KN) | Limiting speeds (rpm) | d | D | T | B | C | r min | r1 min | Cr(KN) | Cor(KN) | Grease lub. | Oil lub | 33116 | 80 | 130 | 37.00 | 37 | 29.0 | 2.0 | 1.5 | 191.0 | 294.0 | 2800 | 3800 | 30216 | 80 | 140 | 28.25 | 26 | 22.0 | 2.5 | 2.0 | 161.0 | 202.0 | 2700 | 3600 | 32216 | 80 | 140 | 35.25 | 33 | 28.0 | 2.5 | 2.0 | 203.0 | 271.0 | 2700 | 3600 | 33216 | 80 | 140 | 46.00 | 46 | 35.0 | 2.5 | 2.0 | 250.0 | 371.0 | 2700 | 3600 | 30316 | 80 | 170 | 42.50 | 39 | 33.0 | 3.0 | 2.5 | 294.0 | 355.0 | 2300 | 3100 | 32316 | 80 | 170 | 61.50 | 58 | 48.0 | 3.0 | 2.5 | 383.0 | 503.0 | 2300 | 3100 | 33217 | 85 | 150 | 49.00 | 49 | 37.0 | 2.5 | 2.0 | 294.0 | 439.0 | 2500 | 3400 | 30317 | 85 | 180 | 44.50 | 41 | 34.0 | 4.0 | 3.0 | 316.0 | 384.0 | 2200 | 2900 | 30217 | 85 | 150 | 30.50 | 28 | 24.0 | 2.5 | 2.0 | 182.0 | 231.0 | 2500 | 3400 | 33117 | 85 | 140 | 41.00 | 41 | 32.0 | 2.5 | 2.0 | 224.0 | 346.0 | 2600 | 3500 | 32017 | 85 | 130 | 29.00 | 29 | 22.0 | 1.5 | 1.5 | 150.0 | 234.0 | 2800 | 3700 | 32217 | 85 | 150 | 38.50 | 36 | 30.0 | 2.5 | 2.0 | 232.0 | 315.0 | 2500 | 3400 | 32317 | 85 | 180 | 63.50 | 60 | 49.0 | 4.0 | 3.0 | 439.0 | 587.0 | 2200 | 3000 | 32018 | 90 | 140 | 32.00 | 32 | 24.0 | 2.0 | 1.5 | 178.0 | 276.0 | 2600 | 3500 | 33117 | 90 | 150 | 45.00 | 45 | 35.0 | 2.5 | 2.0 | 258.0 | 413.0 | 2500 | 3300 | 30218 | 90 | 160 | 32.50 | 30 | 26.0 | 2.5 | 2.0 | 204.0 | 261.0 | 2400 | 3200 | 32218 | 90 | 160 | 42.50 | 40 | 34.0 | 2.5 | 2.0 | 263.0 | 362.0 | 2400 | 3200 | 32019 | 95 | 145 | 32.00 | 32 | 24.0 | 2.0 | 1.5 | 182.0 | 287.0 | 2500 | 3300 | 32219 | 95 | 170 | 45.50 | 43 | 37.0 | 3.0 | 2.5 | 311.0 | 439.0 | 2200 | 3000 | 33019 | 95 | 145 | 39.00 | 39 | 32.5 | 2.0 | 1.5 | 226.0 | 382.0 | 2500 | 3300 | 30219 | 95 | 170 | 34.50 | 32 | 27.0 | 3.0 | 2.5 | 231.0 | 299.0 | 2200 | 3000 | 32020 | 100 | 150 | 32.00 | 32 | 24.0 | 2.0 | 1.5 | 185.0 | 298.0 | 2400 | 3200 | 32220 | 100 | 180 | 49.00 | 46 | 39.0 | 3.0 | 2.5 | 347.0 | 495.0 | 2100 | 2800 | 32021 | 105 | 160 | 35.00 | 35 | 26.0 | 2.5 | 2.0 | 215.0 | 344.0 | 2200 | 3000 | 32022 | 110 | 170 | 38.00 | 38 | 29.0 | 2.5 | 2.0 | 248.0 | 395.0 | 2100 | 2800 | 33022 | 110 | 170 | 47.00 | 47 | 37.0 | 2.5 | 2.0 | 287.0 | 502.0 | 2100 | 2800 |
|
Our Company workroom and fair booth at a glance:
Tapered roller bearings have the inherent advantage of being adjustable and, they can be set to approach optimum performance in almost any application. Automated roller bearing setting techniques offer many advantages like reduced setting time, assembly cost, and and reliable setting. If there is any question welcome to keep in contact usAttending some professional fair
Address:
No 25, Zhihecheng, Sunjiajing Henghe Town, 315318, Cixi, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, IATF16949
Company Introduction:
NINGBO CIE INDUSTRY AND TRADE Co., Ltd was established from 1988 in China and export more than 30 years old mainly for Industrial bearing Our Head Company registered capital is USD1, 500, 000, and we have 1, 200 employees contributing to the turnover of more than 0.8 billion US dollars.
We have passed the evaluations of ISO9001: 2001 quality management system, ISO14001: 2004 environment management system and OHSAS18001: 1999 certification. We possess more than ten subsidiary companies, an industrial zone named CIE Industry occupying 25, 000 square meters, and more than ten manufacturing factories respectively engaged in high quality automotive parts and bearings, including automotive wheel bearings and kits, auto bearings, automotive bearings, wheel-hub units and kits, air-conditioner compressor bearings, steering-gear bearings, deep groove ball bearings, tapered roller bearings, needle roller bearings and special non-standard bearings, ball screw, linear guide rail and block assembly, steering systems with power steering gear, manual steering gears like recirculating balls and nut steering gears, racks and pinion steering gears, steering columns, steering linkages, as well as steering gearbox parts like gear sector shafts, worm assemblies and ball screws, linear guide rails and block systems. You can find our products installed as OEM equipment in automobiles from Europe, Asia and the U. S. A.
Our subsidiary company-CIE Auto Source Industry Co., Ltd. Was established in 1996, and is strong at the production of bearings, Power Transmission Parts and Steering System, of which the details focus on the following issues:
Design strength:
Our in-house team of approximately 60 experienced engineers is constantly developing newer and better bearing models, and auto parts mainly for steering systems. The most advanced computer aided design (CAD) systems and Germany-imported grinder machines are utilized to incorporate your specific requirements. Our ratio of R&D investment is much higher than the average in domestic industry.
Quality control:
Some of our QC instruments and meters are imported from Japan and Germany. We inspect every item with Talyrond roundness testing instruments before packaging. Our team also performs noise and vibration tests as well as radial and axial clearance inspection. Steering system parts are inspected on fatigue test bench, metering inspection center, 3D measuring apparatus, performance test bench and alignment test bench.
Services:
We are committed to providing first class services and top quality products through:
1)Developing trading relationships of mutual trust with customers and suppliers;
2)Training and development of all our employees to enable them to release their full potentials and provide career progression;
3)Supporting objectives which safeguard the environment, leading to better working practices and safety running of machine and operation;
4)Improving efficiency by incorporating technological solutions
5)Exceeding customer′s expectation for service, quality and value for money\
6)Improving communications with our customers, suppliers and staff to keep them up to date with industrial development and news
Constantly contacting customers for product′s further development is given higher priority at NINGBO CIE INDUSTRY AND TRADE Co., Ltd., and serious development work relies on knowing the demands and requirements of the market.