High Duty Truct of Steering Pitman Shaft

Product Details
Customization: Available
After-sales Service: Yes
Warranty: 3 Years
Manufacturer/Factory, Group Corporation
Gold Member Since 2007

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Type of Ownership
Limited Company
Management System Certification
ISO 9001, ISO 14001, IATF16949
  • High Duty Truct of Steering Pitman Shaft
  • High Duty Truct of Steering Pitman Shaft
  • High Duty Truct of Steering Pitman Shaft
  • High Duty Truct of Steering Pitman Shaft
  • High Duty Truct of Steering Pitman Shaft
  • High Duty Truct of Steering Pitman Shaft
Find Similar Products

Basic Info.

Model NO.
CIE-HD-102
Type
Steering Gears/Shaft
Material
Steel
Certification
ISO, AISI, DIN, CE, ASTM, JIS, GB, BS
Automatic
Semi-Automatic
Standard
Standard
Condition
New
Application
Truck
OEM
Acceptable
Processing
Forging and Maching
Usage
Aftersale Market
Transport Package
in Craft Paper Carton
Specification
ISO9002
Trademark
CIE
Origin
Ningbo, Zhejiang, China
HS Code
87089440
Production Capacity
50, 000pcs/month

Product Description

Different steering shafts are available for high duty truck, and jeep. Our shafts could get smooth operation with steering worm as well as keeping side play from the worm gears. We have more than 20 years of experience in this line.

Different steering shafts are available for high duty truck, and jeep. Our shafts could get smooth operation with steering worm as well as keeping side play fromthe worm gears. We have more than 20 years of experience in this line.

The Pitman arm is a linkage attached to the steering gear (see recirculating ball) sector shaft, that converts the angular motion of the sector shaft into the linear motion needed to steer the wheels. The Pitman arm is supported by the sector shaft and supports the drag link or center link with a ball joint. It transmits the motion it receives from the steering box into the drag (or center) link, causing it to move left or right to turn the wheels in the appropriate direction. The idler arm is attached between the opposite side of the center link from the Pitman arm and the vehicle's frame to hold the center or drag link at the proper height. A bad pitman arm can cause play in the steering, and may get worse over time.
A Pitman shaft is a column extending from the steering sector, which attaches to the Pitman arm, which moves the tie rods. Depending on the turn direction, the fluid from a pump moves a piston forward or backward. This action moves a nut, which turns the Pitman shaft and steering linkage. The movement inside the steering box causes the Pitman shaft and arm to rotate, applying leverage to the relay rod, which passes the movement to the tie rods.

Features:

Steering Shafts
Disconnect the steering shaft from the steering box input shaft. Often the upper end of the steering shaft will have a splined section, which will allow the shaft to be collapsed slightly and enable you to clear the steering box input shaft. Next, look for the large bolts attaching the steering box to the frame. Remove this hardware, being careful to support the surprising weight of the steering box as the last bolt is removed. Lower the unit down and out of the underside of the vehicle. If this is not possible due to space constraints, the box will have to come up through the engine compartment, which may require temporary removal of accessories like the alternator or power steering pump. On vehicles equipped as such, check the ball joint on the end of the pitman arm for excessive play, and if you have not already done so swap the pitman arm to the new steering box. Install the new steering box in the vehicle, reattach the steering shaft, hoses, and steering linkages, being sure to torque all hardware to the manufacturer's specifications. Refill the power steering pump reservoir with the proper fluid, reconnect the battery, and start the engine. Look for any fluid leakage, then begin turning the steering wheel back and forth from lock to lock. Shut off the engine after each pass, checking and refilling the power steering pump reservoir to the proper level. Air will slowly escape the system, so check the fluid level every few days after the installation. Assuming the ball joints and the rest of your steering components are in satisfactory condition, you should now be enjoying "like new" steering, and vehicle wandering will be a thing of the past!

Also welcome to work with us together for the following steering pitman shaft for OEM or aftersale market
ACURA / ACURA TRUCKS / AUDIBMW / BUICK / CADILLAC
CHEVROLET / CHEVROLET/GMC TRUCKS / CHRYSLERCHRYSLER TRUCK / DODGE / DODGE TRUCK
EAGLE / FORD & MERCURY / FORD TRUCKGEO / HONDA / HONDA TRUCKS
HYUNDAI / HYUNDAI TRUCK / INFINITIINFINITI TRUCKS / ISUZU / ISUZU TRUCKS
JAGUAR / JEEP / KIAKIA TRUCK / LEXUS / LEXUS TRUCKS
LINCOLN / MAZDA / MAZDA TRUCKMERCEDES / MERCURY / MERCURY TRUCK
MERKUR / MITSUBISHI / MITSUBISHI TRUCKNISSAN / NISSAN TRUCKS / OLDSMOBILE
OLDSMOBILE TRUCK / PLYMOUTH / PLYMOUTH TRUCKPONTIAC / PONTIAC TRUCK / RENAULT
SAAB / SATURN / SCIONSUBARU / SUZUKI / TOYOTA
TOYOTA TRUCK / VOLKSWAGEN / VOLVO
PART NUMBER LISTING - REMANUFACTURED STEERING PUMPS (IMPORT & DOMESTIC)

Other Relative series:
High Duty Truct of Steering Pitman ShaftOur workroom at a glance:
High Duty Truct of Steering Pitman Shaft
We attend some professional fair and abroad.
High Duty Truct of Steering Pitman Shaft

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier